Ready To Carve?
Have a question about our products or capabilities? We are happy to answer any questions you have and guide you through the process of deciding what you need.
CW Racing System – C02 Dragster Series Jig
$350.00
Get in the Race with CarveWright Racing System, an affordable CNC solution for the Dragster Competition. There are two main pieces to the CW Racing System – Dragster Series: the jig, which fits into the CarveWright machine, & the software, used to import the .stl formatted dragster design. Students import their .stl car design into the CarveWright Designer Software and upload ready to carve. The wood blank is loaded into the carving jig and carved on one side. After that side is complete, the wood blank is flipped, and the second side is carved. The result; a fully three dimensional dragster car!
Stop watching the competition from the sidelines.
Get in the Race with CarveWright Racing System, an affordable CNC solution for the Dragster Competition. There are two main pieces to the CW Racing System – Dragster Series: the jig, which fits into the CarveWright machine, & the software, used to import the .stl formatted dragster design. Students import their .stl car design into the CarveWright Designer Software and upload ready to carve. The wood blank is loaded into the carving jig and carved on one side. After that side is complete, the wood blank is flipped, and the second side is carved. The result; a fully three dimensional dragster car!
INCLUDES:
- Jig for carving dragster design on basswood or balsa blanks.
- 1/8″ CO2 Carving Bit (BCR125CO2)
- 2 Allen Wrenches (4mm Hex Allen Wrench and 3/16″ Hex Allen Wrench)
- Online Instructional video (SEE HERE)
| Weight | 6.10 lbs |
|---|---|
| Dimensions | 14.5 × 12 × 3.5 in |