Controller Cut-off Switch


SKU: P007-00006 Category:

Controller Cut-off Switch (without cable) requires soldering. (Close Cover switch) – located in front on left hand side of head cover on keypad side. This interrupts the controlled movement of the motion control servo motors. Do not by-pass this switch as it could result in injury or damage to your machine.

NOTE: A Model machines may require the replacement of the cable and switch. If your old switch is soldered to the cable, you will need C1009 cable as well.

Weight 0.003 lbs
Dimensions 0.75 × 0.25 × 0.125 in
Scroll to Top