The DC-INSERT – Dust Collection for CarveWright
$70.00
A Clean Machine Is A Well Performing Machine
One of the best things possible to do with your CarveWright machine is keep it clean. Dust from carving can sometimes cause a whole slew of machine errors leading to user frustration. Keeping the CarveWright free of dust will help prevent all sort of errors and keep your machine carving trouble free. The DC-INSERT has been proven to out perform all other dust collection system available! Customers who have tried other systems and then purchased our DC-INSERT have reported much better dust removal and wished they had started with the DC-INSERT to begin with.
Out of stock
A Clean Machine Is A Well Performing Machine
One of the best things possible to do with your CarveWright machine is keep it clean. Dust from carving can sometimes cause a whole slew of machine errors leading to user frustration. Keeping the CarveWright free of dust will help prevent all sort of errors and keep your machine carving trouble free. The DC-INSERT has been proven to out perform all other dust collection system available! Customers who have tried other systems and then purchased our DC-INSERT have reported much better dust removal and wished they had started with the DC-INSERT to begin with.
The DC Insert – Simply The Best Carvewright Dust Collection System
- Clears Dust – Reduces the dust issues of your CarveWright machine for better machine performance!
- Light Weight – Made from light gauge galvanized sheeting. All metal construction greatly reduces/eliminates all issues with static electricity compared to plastic/plexiglass and wooden units.
- Perfect Fit – Does not need to be removed to install/change bits for either the CarveWright QC, CarveTight, or the Rock Chuck.
- Perfect View – Clear vision of the carving area, dust free, with either a slight modification to the cover or pins to aid close the switches. Modification of the cover DOES NOT! void warranty.
- Simple Installation – Easy install and removal by 2 screws attached to the mounting plate. The holes have been pre-drilled by LHR. Simply insert the unit and attach the two screws included with the DC Insert.
- Easy Connection – 4″ straight dust collector connection is offset to the non keyboard side of the CW. Hook up to your dust collection system or a shop vac.
- The DC Insert Has Been Approved By LHR/CarveWright As A 3rd Party Add-On
Product Includes: Dust collection hood, two 4mm screw and washers. Installation instructions for the cover modification along with how to add tabs to the cover so you do not need to modify/cut it will be sent VIA EMAIL.
SHIPPING: Shipping to contiguous US States included in price. This package is shipped from RingNeckBlues (not LHR).
NOTE: This product may require modification of the clear cover. After modification, do not operate the CarveWright machine without the DC Insert installed, or without an unmodified cover. You can ontact CarveWright to purchase a pre-modified clear cover at 713-473-6572
This product’s shipping, warranty, repair, and service are provided by the manufacturer. LHR Technologies does not warrant or provide service for this product. Please send all inquiries to ringneckblues or visit www.ringneckblues.net
