Why RAVEN Wins: Scan It, Then Carve It

Say a customer hands you a decorative drawer pull from a hundred-year-old dresser and asks you to make four more just like it. Or you’re restoring a piece of trim and the original profile isn’t sold anywhere anymore. On most CNC setups, that job is dead before it starts. You’d need to track down a separate 3D scanner, scan the piece, clean up the mesh in some other piece of software, then figure out how to get that file into your CAM program looking anything like the original.

RAVEN skips all of that.

A scanner that’s already part of the machine

The RAVEN Scanning Probe plugs straight into the machine, no separate scanner purchase and no third-party software to learn. Secure the object to a scanning sled, load it the same way you’d load a board for carving, and the machine does the rest. It can scan almost any material, including soft ones like clay or wax, which makes it useful for antique restoration work as much as for original designs.

Once the scan finishes, the data imports straight into Designer, which includes basic cleanup tools to tidy it up. If you’ve got Sculptor, you can do more detailed cleanup and editing there instead, smoothing and refining the surface further. Either way, the finished scan lands in your pattern library just like any other pattern. Add it to a design, change the depth or scale, and carve it.

Built for real objects, not just files

The probe scans at up to .005″ resolution, with a usable scan area that stretches over two feet long in its highest-quality setting. That’s enough detail for trim profiles, carved hardware, reliefs, even faces and figures, not just flat artwork.

Other CNC machines have scanning probes too. What’s different is how little stands between scanning and carving. RAVEN’s probe, Designer, and the machine itself are all one integrated system, so a scan can go from the sled to your pattern library with little effort. On a lot of other setups, the probe is a third-party piece of hardware that needs its own software just to talk to your CAM program, plus its own setup and calibration before it’ll even read a scan accurately, one more thing to get right before you’ve carved anything at all.

Why RAVEN Wins

Other CNC machines can scan an object. RAVEN’s probe plugs in and just works, with no setup, no calibration, and no extra software standing between the scan and the finished piece.

See the Scanning Probe →
Shop RAVEN →

Scroll to Top